Water Recycling System

Separation Type

Filtration and Polishing System

Types of Separation

Suspended solids, oil & grease, BOD, COD, and metals

OWS Dimensions

6.0m Long x 2.4m Wide x 2.4m High

Water Recycling System

Water Recycling System | Specifications

Model Length Width Height
EL-25 6.0m 2.4m 2.4m
EL-100 6.0m 2.4m 2.4m
Model EL Range
Feed Water Source Industrial wash effluent, wash bay effluent, mine vehicle wash effluent, etc.
Flow Capacity EL25: 25L/min | EL100: 100L/min
Dimensions 6m x 2.4m 2.4m (Containerised), 2.3m x 1.1m x 2.2m (Skid-Multiple)
Dry Weight Approx. 5 Tonne
Power Requirements 240 or 415 volt, 43 Amps, 5.0 kW
Operating pH 6 to 10 pH (pH correction will eliminate pH inconsistencies of raw effluent)
Operating Temperature Maximum 40 deg C (higher temperature can emulsify the oils and grease)
Inlet – Suspended Solids 200 to 1,500 mg/L (with peaks up to 5,000 mg/L)
Inlet – Fats, Oils & Grease 200 to 2,000 mg/L (with peaks up to 5,000 mg/L)
Filtration Pore Size 15 µm for the CMS 5 to 10 µm equivalent pore size for the Deep Bed Media Filter
Suspended Solids Reduction Up to 95% (for EL100)
BOD, COD reduction Up to 80% 
Fats, Oils and Grease reduction Up to 95% (for EL100)

EL Technical Data

MAIN COMPONENTS
REF ITEM
1 SYSTEM FEED PUMP
2 CMS-030
3 OWS FEED PUMP
4 OWS-030
5 TRANSFER PIT
6 DOSING & DISINFECTION SYSTEM
7 POLISHING TANK
8 POLISHING RECIRCULATION PUMP
9 POLISHING FILTER
10 CONTROL PANEL
CUSTOMISE YOUR WATER RECYCLING PLANT
Components Standard EL100 Options & Upgrades
Flow Capacity 100 L/min (6 m³/hr) 25 | 50 or 100/min
Equalisation & Effluent Storage Solids Settling Tank Single or multiple
Solids Removal CMS Filter DAF
Oil Removal Oil-Water Separator DAF
Metals Removal   DAF
Biological Treatment   Bioreactor
Water Polishing Deep Bed Media Filter Water Softening | Ion Exchange
Membrane Filtration   UF | RO
Disinfection System Chlorine Dosing UV Disinfection
Chemical Dosing System pH Correction System Coagulant Dosing ( for DAF) | Flocculant Dosing (for DAF) Antiscalant Dosing (for RO) | SMBS Dosing (for RO)
Chemical Requirements EnviroBase | EnviroAcid | Enviro Chlor EnviroCoag | EnviroFloc | Antiscalant | SMBS
Media Requirements CMS Filter Paper | EnviroDex Ion Exchange resin
Installation Containerised Skid Mounted

Wash Bay for Parts

System Specifications

Pad Qty: 0.5 Pad
Wash Bay Size: 2.4m Long x 3.5m Wide
Walls: 1.2m | 1.8m | 2.4m High
Ramps: 0.6 Wide x 1.5m Long each
Gutter: Galvanised with float switch
Weight Capacity: 2 Tonne per axle rating
Warranty: 10 Years structural warranty
Parts Wash Bay | 2T

Wash Bay for Cars & 4WD

System Specifications

Pad Qty: 1 Pad with 1.1m wide walkways
Wash Bay Size: 6.0m Long x 4.7m Wide
Walls: 2.0m High
Ramps: 0.9 Wide x 1.5m Long each
Gutter: Galvanised with float switch
Weight Capacity: 2T and 12T (Tonne per axle rating)
Warranty: 10 Years structural warranty
Cars & 4WD Wash Bay | 2T

Wash Bay for Trucks

System Specifications

Pad Qty: 6 Pads
Wash Bay Size: 14.4m Long x 6.5m Wide
Walls: 1.2m | 1.8m | 2.4m High
Ramps: 2T – 1.5m Long & 12T 2m Long
Gutter: Galvanised with float switch
Weight Capacity: 2T and 12T (Tonne per axle rating)
Warranty: 10 Years structural warranty
Truck Wash Bay | 12T

Clients

See why over 500 companies trust us.