Dissolved and suspended particles are present in most industrial wastewater. To remove these particles from the water, Coagulation and Flocculation processes can be used. Coagulation-Flocculation is a chemical water treatment process often applied prior to sedimentation and filtration. Enviro Concepts provides proven Pre-Coagulation and Pre-Flocculation auxillary equipment for a wide range of water and wastewater treatment applications.
Applications
Enviro Concepts Chemical Mixing and Dosing equipment is used prior to solid-liquid separation processes in our waste water treatment plants
like the Dissolved Air Flotation (DAF) or the Lamella Clarifier. Some of the applications where coagulation and flocculation systems are used:
- Potable Water Pre-Treatment
- Vehicle and Equipment Wash
- Commercial Trade Waste
- Industrial Waste Water
- Council Waste Water
- Bore water and Sea water Clarification
Static Mixers
(Clear PVC Static Mixer – 1.5 to 230 LPM)
- PVC clear pipe
- 6 or 12 mixing elements
- Edge sealing and Male NPT threads
Material | Clear PVC |
Mixing Element | 6 or 12 element |
Connection | Male NPT thread |
Pipe Diameter | From 10 to 50 mm |
Mixer Length | From 165 to 889 mm |
Weight | From 36 to 1,219 grams |
Max Working Pressure | Up to 2,140 kPa |
Typical Flow | 1.5 to 230 LPM (0.09 to 14m³ |
Pressure Loss | 1.7to 169.0 kPa |
Pipe Flocculators
(Flocculation Pipe Mixers)
- Chemical injection and sampling ports
- Clear PVC section for visual inspection
Material | PVC or Stainless Steel |
Flow Capacity | From 1.0 to 200 m³/hr |
Inlet/Outlet Connections | From 25 to 250mm |
Approx. Length | From 2000 to 5500 mm |
Approx. Width | From 370 to 1400 mm |
Approx. Height | From 800 to 1700 mm |
Options | Chemical dosing ports |
Frames | Coated/Galvanised Carbon Steel |
Portable and Top-Entry Mixers
(Slow Speed, Portable Clamp Mount and Slow Speed, Fixed Top Mount)
- Portable clamp mounted or fixed
- Ground gears in helical unit design
- Stainless steel shafts, couplings and impellers
Motor | 415V, 3-Phase, IP55 |
Impeller and Shaft | SS316,other grades available |
Power | 0.25 to 2.20 kW (0.7-4.9A) |
Speed | 325-353 rpm |
For larger mixers contact Enviro Concepts to discuss your requirements in detail.
To download the specification sheet, visit this page.
For a FREE ESTIMATE, contact us now!